• WR
• INFO
• IMAGES
• DOWNLOADS

• INDIVIDUAL ELEVATOR WIRE ROPE SYSTEM SENSOR

  The WR individual wire rope sensor provides an easy and precise solution for controlling the load in traction lifts.

  When used with the MWR-4 control unit, it becomes the perfect solution for installations in which it is necessary to monitor the balance of the rope tension, or where there is extremely limited headroom.

  

  FEATURES:

  • Automatic calibration using the wire rope diameter, meaning no need for test weights.
  • Quick and easy installation (5 mins.)
  • Reduced dimensions.

• MECHANICAL FEATURES:

  Operating capacity (RC)	1000 Kg
  Safe load	150% RC
  Overload	200% RC
  Deflection at overload	<0.5 mm
  Hysteresis	0.1% RC
  Total error	<5% RC
  Weight	0.2 Kg/sensor

  TEMPERATURE FEATURES:

  Operating temperature

  -10ºC / 50ºC

• 

  

• DOWNLOADS:

  WR-2016HOT

  WR Datasheet

   2016-11-18

    Multilanguage

   419.02 KB

  Download

In our range of designs we have four types of sensors which are mounted onto the wire ropes.

These sensors measure the tension in the wire rope and, according to the requirements of the customer, the following options are available:

ILC2

ILC3

LMC

WR

WR-USB

ILC-CANopen®

All of these solutions have the advantage of automatic calibration through the diameter of the wire rope. It is, therefore, unnecessary to use test weights to perform the calibration, although calibration using test weights is also an option for the installer.

• LMC
• INFO
• IMAGES
• DOWNLOADS

• UNIVERSAL ELEVATOR WIRE ROPE SYSTEM

  The LMC wire rope sensor provides an easy and precise solution for controlling the load in traction lifts with all types of roping (1:1, 2:1 & 4:1).

  Its quick and easy installation (only 5 mins.) with separate control unit and automatic calibration make it the perfect solution for both modernizations and new installations with complicated dimensions.

  It is recommended to use this type of sensor when a signal is required by the lift controller to control rollback.

  

  FEATURES

  • Automatic calibration using the wire rope diameter, meaning no need for test weights.
  • Universal rope clamps for all types of rope distribution.
  • Quick and easy installation (5 mins.)
  • Suitable for 1:1, 2:1 & 4:1 roped installations.
  • Models available:
    • Standard LMC sensor with 4000 KG capacity (P+Q).
    • Reinforced LMC sensor with 7500 KG capacity (P+Q).

• MECHANICAL FEATURES:

  Operating capacity (RC)	4000/7500 Kg
  Safe load	150% RC
  Overload	200% RC
  Deflection at overload	<0.5 mm
  Hysteresis	<0.1% RC
  Total error	<3% RC
  Weight	2 Kg

  TEMPERATURE FEATURES:

  Operating temperature

  -10ºC / 50ºC

• 

  

• DOWNLOADS:

  LMC-2016HOT

  LMC Datasheet

   2016-11-18

    Multilanguage

   480.64 KB

  Download

• ILC3
• INFO
• IMAGES
• DOWNLOADS

• INTELLIGENT ELEVATOR WIRE ROPE SENSOR

  The ILC3 intelligent wire rope sensor provides an easy and precise solution for controlling the load in traction lifts.

  Its quick and easy installation (only 5 mins.) and calibration through the diameter of the ropes make it the perfect solution for lift modernizations with considerably high load capacities.

  

  FEATURES:

  • 3 programmable alarms: Presence, Full load & Overload.
  • Integrated display to show weight values up to 9,999 KG.
  • Automatic calibration using the wire rope diameter, meaning no need for test weights.
  • Universal rope clamps for all types of rope distribution.
  • EEPROM data memory.
  • Integrated software to correct weight increases due to compensating chain.
  • Quick and easy installation (5 mins.)
  • Suitable for 1:1-roped installations.
  • Connection options:
    • Connectors.
    • Cable.

• OUTPUT OPTIONS:

  Analogue output: 0-20, 0-24 or 4-20(mA).

  Communications: RS485.

  ELECTRICAL FEATURES:

  Power supply voltage	24-48 Vdc
  Disabling input	24-230 Vac/dc
  Relay contacts	250Vac 3A

  MECHANICAL FEATURES:

  Operating capacity (RC)	6.000 Kg
  Safe load	150% RC
  Overload	200% RC
  Deflection at overload	<0.5 mm
  Hysteresis	<0.1% RC
  Total error	<3% RC
  Weight	2 Kg

  TEMPERATURE FEATURES:

  Operating temperature

  -10ºC / 50ºC

• 

  

• DOWNLOADS:

  ILC3-2016HOT

  ILC3 Datasheet

   2016-11-18

    Multilanguage

   558.77 KB

  Download